You are here: Home / Archives for Vertical Bridge / Gantry Machines

Quaser

5 Axis / Bridge Machines

Quaser 

 
 

5 Axes Machine

MF400C

Quaser

TECHNICAL DATA

Work piece:
?407 x 305 mm

Travels:
X: 410 mm
Y: 610 mm
Z: 510 mm
A:+30°~-120°
C:360° (continuous)

Spindle:
Speed / power
Coupling spindle:
9,000 min-1 / 10.5 kW

ATC: 30 (48 / 60)*

Feed rate:
Rapid:
X / Y / Z: 36 / 36 / 24 (m/min)
A / C: 25 / 25 (min-1)
Acceleration: 4 / 3 / 2 (m/s2)
Ball screw size: ?45

Controller:
SIEMENS 828D (5 Faces)

Machine size:
Floor space: 2,500 x 2,820 mm
Weight: 7,300 kg
* as option

5 Axes Machine

UX300

Quaser

TECHNICAL DATA
Work piece:
?300 x 300 mm 

Travels:
X:410 mm
Y:610(±305) mm
Z:500 mm
A:+30°~-120°
C:360 (continuous)

Spindle:
Speed / power
Belt spindle:
9,000 min-1 / 22 kW ?F?; 25 kW ?T?
12,000 min-1 / 22 kW ?F?; 25 kW ?T?
15,000 min-1 / 22 kW ?F?; 25 kW ?T?
Coupling spindle:
15,000 min-1 / 22 kW?F?; 25 kW?T?

ATC: 48(60)*

Feed rate:
Rapid:
X / Y / Z: 36 / 36 / 32 (m/min)
A / C: 25 / 25 (min-1)
Acceleration: 5.5/ 5.5 / 5.5 (m/s2) ?F?
5 / 5 / 5 (m/s2) ?T?
Ball screw size: ?45

Controller:
?F?:FANUC 18iMB (5 Faces)
?T?:HEIDENHAIN iTNC530 (5 Axes)

Machine size:
Floor space: 2,500 x 3,160 mm
Weight:8,100 kg
*as option

5 Axes Machine

UX600

Quaser

TECHNICAL DATA
Work piece:
?600 x 400 mm 

Travels:
X:885(580+305) mm
Y:800(-375~+425) mm
Z:500 mm
A:+30°~-120°
C:360° (continuous)

Spindle:
Speed / power
Belt spindle:
9,000 min-1/ 22 kW?F?;25 kW?T?
12,000 min-1 / 22 kW?F?;25 kW?T?
15,000 min-1/ 22 kW?F?;25 kW?T?
Coupling spindle:
15,000 min-1 / 22 kW?F?;25 kW?T?
Coupling spindle:
15,000 min-1 / 22 kW?F?;25 kW?T?

ATC: 48(60)*

Feed rate:
Rapid:
X / Y / Z: 36 (m/min)
A / C: 25 / 33.3 (min-1)
Acceleration: 5.5/ 5.5 / 5.5 (m/s2) ?F?
5 / 5.5 / 5.5 (m/s2) ?T?
Ball screw size: ?45

Controller:
?F?:FANUC 18iMB (5 Faces)
?T?:HEIDENHAIN iTNC530 (5 Axes)

Machine size:
Floor space: 3,950 x 3,670 mm
Weight:12,100 kg
*as option

5 Axes Machine

UX730 Dyn

Quaser

TECHNICAL DATA
Work piece:
?730 x 450 mm 

Travels:
X:995(625+370) mm
Y:800(-375~+425) mm
Z:500 mm
A:+30°~-120°
C:360° (continuous)

Spindle:
Speed / power
Coupling spindle:
15,000 min-1 / 25 kW
Motor spindle:
15,000 min-1 / 42 kW
25,000 min-1 / 61 kW

ATC: 48(60)*

Feed rate:
Rapid:
X / Y / Z: 36 (m/min)
A / C: 25 / 60 (min-1)
Acceleration:
5.5/ 5.5 / 5.5 (m/s2)
Ball screw size: ?45

Controller:
HEIDENHAIN iTNC530 (5 Axes)

Machine size:
Floor space: 3,950 x 3,670 mm
Weight:12,700 kg
*as option

Filed Under: Manufacturers/Brands, Quaser, Quaser Vertical Bridge / Gantry Machines, Vertical Bridge / Gantry Machines Tagged With: , ,

Kitamura

HORIZONTAL
Travels (X, Y, Z)
VERTICAL
Travels (X, Y, Z)
BRIDGE Type:
5-AXIS Type:
JIG BORER
Filed Under: Kitamura, Kitamura Vertical Bridge / Gantry Machines, Manufacturers/Brands, Vertical Bridge / Gantry Machines Tagged With: , , ,

Millitronics BR50

 
Larger View
 
Unique BR Series Bridge Mills offer cost-effective capability for machining large fabricated parts, plates, dies, aluminum molds, or patterns. Huge travels and table surfaces provide tremendous value per square inch of machining capacity. -Milltronics 7200 Series CNC Control standard -Optional 8200 Series CNC Control with solid model graphics available -Optional 24 pocket carousel automatic tool changer -Horsepower and RPM upgrades available -Optional basic coolant system with trough surrounding the table -See IL Models for inline spindles. For other BR Series models click here:
BR50IL,
BR60,
BR60IL,
BR80,
BR80IL 

Warranty

Filed Under: Manufacturers/Brands, Milltronics, Milltronics Vertical Bridge / Gantry Machines, Vertical Bridge / Gantry Machines Tagged With: , , , , ,

FPT Industries Line-DinoMax

FPT Industries
Line

DinoMax

DINOMAX, result of choices aimed at the maximum rationality and efficiency, continues the product and dimensional philosophy where the other FPT’s portal machines (STINGER and DINO) must stop because of the workpiece dimensions or weight. These restrictions do not any longer justify the moving of the workpieces but the machine will move around them.

DINOMAX is a moving bridge Gantry machine of last generation having among its main characteristics a considerable dimensional structure, studied by FPT’s engineers to grant the exploitation of its dynamic and stiffness potentialities for heavy and high accuracy machining.

In the base configuration DINOMAX is supplied with the famous universal Direct Drive head; its undercutting machining features, millesimal positioning and continuous movement of the 2 axes in the space (International FPT’s patent) are one-of-a-kind.

Thus, with the same dimensions and strokes, it allows bigger working areas.

DINOMAX can also be equipped with an auto-calibration electronic device named AUTOCAL, designed and patented by FPT.

This device permits to the user of DINOMAX to perform a periodical control with the relevant automatic calibration of the machine, always obtaining the utmost performance and efficiency. Furthermore, in case of minor collision, the operator can check by himself and eventually reset the basic geometrical characteristics of the machine in few minutes and without extra costs.

DINOMAX can also be equipped with a wide quantity of accessories allowing the personalization of the machine in accordance with the type of work.

DINOMAX has all the features to satisfy the diversified needs of all the sectors such as the aerospace and energy, high accuracy mechanical applications as well as moulds and dies, models, prototypes.

 

Click for Technical Data 

 

Filed Under: FPT Industries, FPT Industries Vertical Bridge / Gantry Machines, Manufacturers/Brands, Vertical Bridge / Gantry Machines Tagged With: , ,

FPT Industries – Raid XL

5 Axis / Bridge Machines
 

FPT Industries – Raid XL
Line

Raid-XL

In the range of 3 axis vertical HSM machines with fixed portal, RAID and RAID XL distinguish themselves for the extraordinary performances in terms of speed and finishing quality.
Designed and studied in each smallest details starting from the working ergonomics up to easy access for checking and loading of the workpieces to be machined, RAID and RAID XL are the sole machines of this category which allow to shift the operator panel to both sides of the machine according to the operator need.

The care and originality of this project permitted to FPT to win in 2002 the sought-after prize for Industrial Design (ADI) acknowledged throughout the world.

The mighty structure with the particular morphology and technical solutions adopted in this machine (as the special rotating nuts for the movement of the axes) allow performances at the highest level for this category.

The result is a machine with the capability to perform the whole range of workpiece machining; from roughing in speed, boring diameters up to 35 mm, rigid tapping up to M24, to the superfinishing of surfaces in which it absolutely distinguishes itself.

RAID and RAID XL is completed by an important range of accessories completing the basic configuration.

 

Click for Technical Data 

 
Filed Under: FPT Industries, FPT Industries Vertical Bridge / Gantry Machines, Manufacturers/Brands, Vertical Bridge / Gantry Machines Tagged With: , ,

Tri-Tech – 5-Axis Machining Centers

5 Axis / Bridge Machines

Tri-Tech – 5-Axis Machining Centers

Line

5-Axis Benefits

The Benefits of 5-axis machining:

  • Reduced machining time: By using a flat bottom endmill and maintaining perpendicularity to the complex surface you can step-over the full diameter of the cutter thereby dramatically reducing the required number of passes across a surface. The same principle applies to sidemilling of angled surfaces.
  • Better surface finish: Using a flat bottom endmill to maintain perpendicularity to the complex surface can eliminate ribbing caused by ball-nose endmills.
  • Eliminate multiple setups required to re-position the work-piece at complex angles.
  • Eliminate costly tooling and fixtures required to hold the work-piece in place.
  • Eliminate manual millwork and handwork required to cleanup kellered surfaces.
  • Machine complex parts that are not otherwise possible, including holes required to be normal to a complex surface.
  • Fewer competitors: Higher profit margins.

Tri-Tech Precision Products Inc. sells a unique milling head that quickly attaches to virtually any 3-axis machining center allowing the spindle to be positioned at any angle within a hemisphere, instantly converting the machine to a fully programmable 5-axis machining center.

Call us at 248-786-3000 for more information.
Filed Under: Manufacturers/Brands, Tri-Tech, Tri-Tech Vertical Bridge / Gantry Machines, Vertical Bridge / Gantry Machines Tagged With: , ,

Vision Wide Bridge Machines

3 Axis / 5 Axis / Bridge Machines
 
 

3 Axis – Vision Wide Double Column Machining Centers
Line

 

 

VB Series

 VB Series

 

VB Series
Double Column Vertical Machining Centers
(1600 mm/62.99″ Y-Axis)
Model VB-1516 VB-2016 VB-2516 VB-3016
Travel:        
X-Axis 59.06″ 78.74″ 98.43 122.05″
Y-Axis   62.99″    
Z-Axis   31.49    
Max. table load (lbs.) 15,400 17,600 19,800 22,000
Distance from spindle end to table   5.90-37.40″    
Number of Tools   40 ATC    
Distance between columns   66.93″    
Spindle Drive Motor   30/35 HP    
Spindle Speed (gear)   50~4500/6000 RPM    
Spindle Speed (pulley)   50~8000/10000 RPM    
Machine net weight (lbs) 40,7000 47,3000 53,900 60,500
Floor Space L x W x H (ft) 21.6 x 17.57 x 13.26′ 24.87 x 17.57 x 13.26′ 28.15 x 17.57 x 13.26′ 32x 17.57 x 13.26 ‘

 

VB Series
Double Column Vertical Machining Centers
(2000 mm/78.7″ Y-Axis)
Model VB-2020 VB-2520 VB-3020 VB-4020
Travel:        
X-Axis 78.74″ 98.43″ 122.05″ 161.42″
Y-Axis   78.74″    
Z-Axis   31.49″    
Max. table load (lbs.) 17,600 19,800 22,000 26,400
Working surface 78.74 x 66.93″ 98.43 x 66.93″ 122.05 x 66.93″ 161.42 x 66.93″
Distance from spindle end to table   5.90 – 37.40″    
Number of Tools   40 ATC    
Distance between columns   82.68″    
Spindle Drive Motor   30/35 HP    
Spindle Speed (gear)   50~4500/6000 RPM    
Spindle Speed (pulley)   50~8000/10000 RPM    
Machine net weight (lbs) 51,700 58,300 64,900 71,500
Floor Space L x W x H (ft) 24.87 X 18.8 X 13.26 28 X 18.8 X 13.26 32 X 18.8 X 13.26 38.65 X 18.8 X 13.26

 

Standard Features:

  • Fanuc 18iMB Control Box Ways
  • Z-Axis High Acceleration Counter Balance
  • Ball Screw Cooling
  • Chip Augers
  • Chip Conveyor
  • Spindle Chiller
  • Absolute Encoders
  • Box Ways

 

 

 

VF Series

 VF Series

 

VF Series
Double Column Vertical Machining Centers
(2300 mm/90.55″ Y-Axis)
Model VF-2000 VF-3000 VF-4000 VF-5000 VF-6000
Travel:          
X-Axis 86.6″ 125.98″ 165.35″ 204.73″ 236.22″
Y-Axis     90.55″    
Z-Axis     36.22″/40.16″    
Max. table load (lbs.) 19,800 24,200 28,600 33,000 19,800
Working surface 86.61″ x 80.71″ 125.98″ x 80.71″ 165.35″ x 80.71″ 204.73″ x 80.71″ 236.22″ x 80.71″
Distance from spindle end to table     5.9-42.13″    
Number of Tools     40    
Distance between columns     94.49″    
Spindle Drive Motor     30/35 HP    
Spindle Speed (gear)     50~4500/6000 RPM    
Spindle Speed (pulley)     50~8000/10000 RPM    
Machine net weight (lbs) 63,800 73,480 84,480 95,480 105,000
Floor Space 26.2 x 20 x 15.4 32.8 x 20 x 15.4 39.3 x 20 x 15.4 45.9 x 20 x 15.4 52.5 x 20 x 15.4

 

VF Series
Double Column Vertical Machining Centers
(2600 mm/102.36″ Y-Axis)
Model VF-2000 VF-3000 VF-4000 VF-5000 VF-6000
Travel:          
X-Axis 125.98″ 165.35″ 204.72″ 236.22″ 125.98″
Y-Axis     102.36″    
Z-Axis     36.22″/40.16″    
Max. table load (lbs.) 24,200 28,600 33,000 39,600 24,200
Working surface 125.98″ x 80.71″ 165.35″ x 80.71″ 204.72″ x 80.71″ 236.22″ x 80.71″ 125.98″ x 80.71″
Distance from spindle end to table     5.90-42.17″    
Number of Tools     40    
Distance between columns     82.68″    
Spindle Drive Motor     30/35 HP    
Spindle Speed (gear)     50~4500/6000 RPM    
Spindle Speed (pulley)     50~8000/10000 RPM    
Machine net weight (lbs) 80,080 91,080 102,080 112,200 80,080
Floor Space 32.75 x 21 x 15.4 39.3 x 21 x 15.4 45.93 x 21 x 15.4 52.59 x 21 x 15.4 32.75 x 21 x 15.4

 

Standard Features:

  • Fanuc 18iMB Control Box Ways
  • Z-Axis High Acceleration Counter Balance
  • Ball Screw Cooling
  • Chip Augers
  • Chip Conveyor
  • Spindle Chiller
  • Absolute Encoders
  • Box Ways

 

 

 

VH Series

 VF Series

 

VH Series
Double Column Vertical Machining Centers
Y Axis Options of 118.1″ and 137.8″
X Axis up to 401″
Automatic 5 Face Head
Model VH-4230 VH-5230 VH-6230 VH-8230 VH-10230
Travel:          
X-Asis 165.35″ 204.75″ 244.09″ 322.83″ 401″
Y-Axis     118.1″    
Z–Axis     39.37″    
Max. table load (lbs.) 44,000 52,800 61,600 70,400 82,000
Working surface 157.48 x 102.4″ 196.85 x 102.4″ 236.22 x 102.4″ 314.96 x 102.4″ 393.7 x 102.4″
Distance from spindle end to table     8.86 – 48.22″    
Number of Tools     40/60    
Distance between columns     118.11″    
Spindle Drive Motor     30/35 HP    
Spindle Speed     30 ~ 4500/6000    
Machine net weight (lbs) 105,600 lbs. 123,200 lbs. 140,800 lbs. 158,400 lbs. 178,400 lbs.
Floor Space 39.4′ x 22.6′ x 16.4′ 45.9′ x 22.6′ x 16.4′ 52.5′ x 22.6′ x 16.4′ 60.7′ x 22.6′ x 16.4′  
           

 

VH Series
Double Column Vertical Machining Centers
(3500 mm / 137.8″ Y Axis)
Model VH-4230 VH-5230 VH-6230 VH-8230 VH-10230
Travel:          
X-Asis 165.35″ 204.75″ 244.09″ 322.83″ 401″
Y-Axis     137.8″    
Z–Axis     39.37″    
Max. table load (lbs.) 52,800 61,600 70,400 79,200 88,400
Working surface 157.13 x 118.1″ 196.85 x 118.1″ 236.22 x 118.1″ 314.96 x 118.1″ 393 x 118.1″
Distance from spindle end to table     8.86 – 48.22″    
Number of Tools     40/60    
Distance between columns     137.8″    
Spindle Drive Motor     30/35 HP    
Spindle Speed     30 ~ 4500/6000    
Machine net weight (lbs) 114,400 lbs. 132,000 lbs. 149,600 lbs. 167,200 lbs. 187,600 lbs.
Floor Space 39.4′ x 22.6′ x 16.4′ 45.9′ x 22.6′ x 16.4′ 52.5′ x 22.6′ x 16.4′ 60.7′ x 22.6′ x 16.4′  
           

 

Standard Features:

  • Fanuc 18iMB Control
  • Z-Axis High Acceleration Counter Balance System
  • 3 Axis Linear Scales
  • Ball Screw Cooling
  • Two Speed Gear Box Integrated
  • Chip Augers
  • Chip Conveyor
  • Spindle Chiller
  • Roller Ways/Linear Ways (Wide Base)

 

  
Filed Under: Manufacturers/Brands, Vision Wide, Vision Wide Vertical Bridge / Gantry Machines Tagged With: , ,

Cincinnati 5 Axis Gantry Machines

5 Axis / Bridge Machines
 

 

Cincinnati 5 Axis Gantry Machines
Line

 

 

CINCINNATI’s 5-Axis Vertical and Universal machining centers deliver proven results! The V5-4000 offers superior performance in processing large aluminum parts while the versatile U5 Series is capable of 5-axis, 5-sided processing of large parts in a variety of metals.

 

 

 

 

  
Filed Under: Cincinnati, Cincinnati Vertical Bridge / Gantry Machines, Manufacturers/Brands, Vertical Bridge / Gantry Machines Tagged With: , ,